HMC433_06 Datasheet, PDF (3/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 8.0 GHz

v02.0705
5
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
300
250
200
150
100
50
0
-50
-100
-150
-200
-250
-300
23 23.2 23.4 23.6 23.8 24 24.2 24.4 24.6 24.8 25
TIME (nS)
Outline Drawing
HMC433 / 433E
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 8.0 GHz
Absolute Maximum Ratings
RF Input (Vcc= +3.0V)
+15 dBm
Vcc
+3.5V
Maximum Channel Temperature
135 °C
Continuous Pdiss (T=85 °C)
(derate 5mW/°C above 85 °C)
250mW
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
DC blocking capacitors are required at RF input and RF output ports.
Choose value for lowest frequency of operation.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Typical Supply Current vs. Vcc
Vcc (V)
Icc (mA)
2.70
42
3.0
53
3.30
63
Note: Divider will operate over full voltage range shown above
5 - 74
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOT FOR SUGGESTED
LAND PATTERN.
Part Number
HMC433
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC433E
RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H433
XXXX
433E
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com