HMC221_10 Datasheet, PDF (3/4 Pages) Hittite Microwave Corporation – GaAs MMIC SOT26 SPDT SWITCH, DC - 3 GHz

14
HMC221 / 221E
v02.0700
GaAs MMIC SOT26 SPDT
SWITCH, DC - 3 GHz
UED _{Compression vs. Control Voltage}
TIN ^{Carrier at 900 MHz}
Carrier at 1900 MHz
N ^Control
ISCO ^{T Input}
Input Power Input Power Input Power Input Power
for 0.1 dB
for 1.0 dB
for 0.1 dB
for 1.0 dB
Compression Compression Compression Compression
C ^(Vdc)
(dBm)
(dBm)
(dBm)
(dBm)
D ^{DU esigns +3}
17
20
17
20
+5
25
30
24
29
O ^{ew D +8}
31
33
30
32
PR ^{for N Caution: Do not operate in 1dB compression at power levels above}
ended ^{+31 dBm (Vctl = +5 Vdc) and do not “hot switch” power levels}
greater than +20 dBm (Vctl = +5Vdc). DC blocks are required at
Not ^{Recomm ports RFC, RF1 and RF2.}
Absolute Maximum Ratings
Control Voltage Range (A & B)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
-0.2 to +12 Vdc
-65 to +150 °C
-40 to +85 °C
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
14 - 3
Package Information
Part Number
Package Body Material
HMC221
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC221E
RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking
H221
221E
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]