HMC452ST89 Datasheet, PDF (22/22 Pages) Hittite Microwave Corporation – InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz

v01.0205
2100 MHz Evaluation PCB
HMC452ST89 / 452ST89E
InGaP HBT 1 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
5
List of Materials for Evaluation PCB 109824-2100 ^[1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm DC Header
C1
3 pF Capacitor, 0402 Pkg.
C2
2 pF Capacitor, 0402 Pkg.
C3
3.3 pF Capacitor, 0402 Pkg.
C4
15 pF Capacitor, 0402 Pkg.
C5
100 pF Capacitor, 0402 Pkg.
C6
2.2 μF Capacitor, Tantalum
L1
12 nH Inductor, 0402 Pkg.
L2
10 nH Inductor, 0402 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
PCB ^[2]
HMC452ST89 / HMC452ST89E
Linear Amp
109822 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
The circuit board used in this application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of VIA holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
5 - 295