HMC453QS16G_09 Datasheet, PDF (18/22 Pages) Hittite Microwave Corporation – InGaP HBT 1.6 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz

v01.0205
900 MHz Evaluation PCB
HMC453QS16G / 453QS16GE
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.2 - 2.4 GHz
11
List of Materials for Evaluation PCB 108709-900 ^[1]
Item
J1 - J2
J3
C1
C2, C3
C4, C7
C5
C6
C8, C9
C10
Description
PCB Mount SMA Connector
2 mm DC Header
5.0 pF Capacitor, 0402 Pkg.
3.3 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
8.2 pF Capacitor, 0402 Pkg.
56 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
1.0 pF Capacitor, 0402 Pkg.
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropri-
ate heat sink. The evaluation circuit board shown is
available from Hittite upon request.
L1
30 nH Inductor, 0402 Pkg.
L2
20 nH Inductor, 0402 Pkg.
R1
5.6 Ohm Resistor, 0402 Pkg.
U1
PCB ^[2]
HMC453QS16G / HMC453QS16GE
Linear Amp
108707 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
11 - 195