HMC6787ALC5A Datasheet, PDF (17/18 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q UPCONVERTER 37 - 40 GHz

v01.0314
Evaluation PCB
HMC6787ALC5A
GaAs MMIC I/Q UPCONVERTER
37 - 40 GHz
List of Materials for Evaluation PCB Eval01-HMC6787ALC5A ^[1]
Item
Description
J1, J2
SMA Connector
J3, J4
K-Connector SRI
J5 - J11
DC Pins
C1, C4, C7, C10, C13, C16 100 pF Capacitor, 0402 Pkg.
C2, C5, C8, C11, C14, C17 0.1 uF Capacitor, 0402 Pkg.
C3, C6, C9, C12, C15, C18 4.7 µF Capacitor, Case A
U1
PCB ^[2]
HMC6787ALC5A Upconverter
600-00030-00 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR, FR4 or Rogers 4350
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
15
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]