HMC6505LC5 Datasheet, PDF (15/18 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz

v02.0413
HMC6505LC5
GaAs MMIC I/Q UPCONVERTER
5.5 - 8.6 GHz
Pin Descriptions
Pin Number
1 - 4, 6, 9 - 11,
16, 17, 19, 20, 21,
22, 24, 25, 32
Function
N/C
Description
No connection required. The pins are not connected
internally; however, all data shown herein was measured
with these pins connected to RF/DC ground externally.
5
Vdd1
Power supply voltage for LO amplifier. See application
circuit for required external components.
Interface Schematic
7
8, 13, 15,
27, 29, 31
12
14
18, 23
LOIN
GND
This pin is AC coupled
and matched to 50 Ohms.
These pins and package bottom must be
connected to RF/DC ground.
Gate control for RF amplifier, please follow “MMIC Amplifier
Vgg
Biasing Procedure” application note. See application circuit
for required external components.
RFOUT
This pin is AC coupled
and matched to 50 Ohms.
Vdd3,
Vdd2
Power supply voltage for RF amplifier. See application
circuit for required external components.
26
Vctrl
Gain Control Voltage for RF Amplifier
28
IF1
Differential IF input pins. For applications not requiring
operation to DC, an off chip DC blocking capacitor should
be used. For operation to DC this pin must not source/sink
more than 3mA of current or part non function and possible
30
IF2
part failure will result.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
13
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]