HMC711LC5_1005 Datasheet, PDF (14/14 Pages) Hittite Microwave Corporation – GaAs MMIC SUB-HARMONIC UPCONVERTER, 17.7 - 23.6 GHz

v01.0210
Evaluation PCB
HMC711LC5
GaAs MMIC SUB-HARMONIC
UPCONVERTER, 17.7 - 23.6 GHz
9
List of Materials for Evaluation PCB 127912 ^[1]
Item
J1, J2
J3
J4, J5
C1 - C4
C5 - C8
C9 - C12
U1
PCB ^[2]
Description
PCB Mount SMA Connector
PCB Mount K Connector
2mm Molex DC Connector
100 pF Capacitor, 0402 Pkg.
10 nF Capacitor, 0603 Pkg.
4.7 µF Tantalum Capacitor Case A
HMC711LC5 Upconverter
123835 Evaluation Board
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 Ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
9 - 14