HMC765LP6CE_11 Datasheet, PDF (13/14 Pages) Hittite Microwave Corporation – FRACTIONAL-N PLL WITH INTEGRATED VCO, 7.8 - 8.8 GHz

v03.0411
Evaluation PCB
HMC765LP6CE
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 7.8 - 8.8 GHz
7
The circuit board used in the application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly
to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the
top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
7 - 13
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]