HMC877LC3_12 Datasheet, PDF (12/12 Pages) Hittite Microwave Corporation – BROADBAND TIME DELAY & PHASE SHIFTER

Evaluation PCB
HMC877LC3
v01.0312
BROADBAND TIME DELAY & PHASE SHIFTER
SMT, 8 - 23 GHz
List of Materials for Evaluation PCB EVAL01-HMC877LC3^[1]
Item
J1 - J2, J5-J6
J3-J4
TP1-TP5
C1-C3
C5-C7
C8-C9
R2-R3
U1
Description
K Connector
SMA Connector
DC Pin
1000 pF Capacitor, 0402 Pkg.
0.1 µF Capacitor, 0402 Pkg.
4.7 µF Capacitor, Tantalum
4.7 kOhm Resistor, 0402 Pkg.
HMC877LC3 Analog Phase Shifter/
Broadband Time Delay
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
PCB ^[2]
600-00064-00 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
12
Application Support: Phone: [phone] or [e-mail]