HMC711LC5_10 Datasheet, PDF (12/14 Pages) Hittite Microwave Corporation – GaAs MMIC SUB-HARMONIC UPCONVERTER, 17.7 - 23.6 GHz

v01.0210
HMC711LC5
GaAs MMIC SUB-HARMONIC
UPCONVERTER, 17.7 - 23.6 GHz
Pin Descriptions
Pin Number
1 - 3, 7 -
12, 14 - 17,
23 - 26, 28,
31, 32
Function
N/C
4, 6, 18,
20, 30
GND
5
IFIN
13
Vgg
19
RFOUT
Description
The pins are not connected internally; however, all data shown herein was
measured with these pins connected to RF/DC ground externally.
These pins and the package bottom must be connected to RF/DC ground.
This pin is DC coupled. For applications not requiring operation to DC,
this port should be DC blocked externally using a series capacitor whose
value has been chosen to pass the necessary IF frequency range. For
operation to DC, this pin must not source or sink more than 2 mA of
current or part non-function and possible part failure will result.
Gate control for RF amplifier, please follow “MMIC Amplifier Biasing
Procedure” application note. See application circuit for required external
components
This pin is AC coupled
and matched to 50 Ohms.
27
Vdd1
Power supply voltage for x2 multiplier. See application circuit for required
external components.
29
22, 21
LOIN
Vdd2,
Vdd3
This pin is AC coupled
and matched to 50 Ohms.
Power supply voltage for RF amplifier. See application circuit for required
external components.
Interface Schematic
10
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
10 - 301