HMC546MS8G_10 Datasheet, PDF (12/12 Pages) Hittite Microwave Corporation – GaAs MMIC 20W FAILSAFE SWITCH 0.2 - 2.2 GHz

Evaluation PCB
HMC546MS8G / HMC546MS8GE
v06.0809
GaAs MMIC 20W FAILSAFE SWITCH
0.2 - 2.2 GHz
11
List of Materials for Evaluation PCB ^[3]
Item
J1 - J3
J4 - J6
C1 - C6 ^[1]
L1 - L2 ^[1]
U1
PCB ^[2]
Description
PCB Mount SMA RF Connector
DC Pin
Capacitor, 0402 Pkg.
Inductor, 0402 Pkg.
HMC546MS8G / HMC546MS8GE T/R Switch
108992 Evaluation PCB
[1] Please refer to “Components for Selected Frequencies” table
for values.
[2] Circuit Board Material: Rogers 4350
[3] When requesting an evaluation board, please reference
the appropriate evaluation PCB number listed in the table
“Components for Selected Frequencies.”
The circuit board used in the application should be
generated with proper RF circuit design techniques.
Signal lines at the RF port should have 50 Ohm
impedance and the package ground leads and
exposed paddle should be connected directly to
the ground plane similar to that shown above. The
evaluation circuit board shown above is available
from Hittite Microwave Corporation upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
11 - 179