HMC610LP4 Datasheet, PDF (11/12 Pages) Hittite Microwave Corporation – 70 dB RMS POWER DETECTOR, DC - 3.9 GHz

v02.0607
Evaluation PCB
8
HMC610LP4 / 610LP4E
70 dB RMS POWER
DETECTOR, DC - 3.9 GHz
8 - 42
List of Materials for Evaluation PCB 118147 ^[1]
Item
J1 - J2
J3 - J7
C1 - C3
C4, C6, C8, C11, C17
C5, C7, C9, C12
C10
R25
R11, R24
Description
PC Mount SMA connector
DC Pins
1 nF Capacitor, 0402 Pkg.
0.1 μF Capacitor, 0402 Pkg.
100 PF Capacitor, 0402 Pkg.
1000 PF Capacitor, 0402 Pkg.
68 Ω Resistor, 0402 Pkg.
0 Ω Resistor, 0402 Pkg.
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
R4
10k Ω Resistor, 0402 Pkg.
T1
1:1 Balun, M/A-COM ETC1-1-13
HMC610LP4 / HMC610LP4E
U1
Logarithmic Detector / Controller
PCB ^[2]
118144 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com