HMC993LP5E_12 Datasheet, PDF (1/27 Pages) Hittite Microwave Corporation – RF AUTOMATIC GAIN CONTROLLER

v00.0911
Typical Applications
The HMC993LP5E is ideal for:
• Cellular/3G Infrastructure
• WiBro / WiMAX / 4G
• Microwave Radio & VSAT
• Test Equipment and Sensors
• IF & RF Applications
Functional Diagram
HMC993LP5E
RF AUTOMATIC GAIN CONTROLLER
(RF-AGC), 700 - 3000 MHz
Features
Wide Gain Control Range: -11 to +32 dB
High Output IP3: +46 dBm
Positive Analog Control: 0V to +5V
Configurable with 1 or 2 Attenuators
32 Lead 5x5 mm SMT Package: 25 mm²
General Description
The HMC993LP5E is an RF analog controlled variable
gain amplifier composed of two identical voltage
variable attenuators in combination with an InGaP
HBT gain block MMIC amplifier which operates from
0.7 to 3.0 GHz, and can be controlled to provide
anywhere from -11 dB attenuation, to 32 dB of gain.
The HMC993LP5E delivers noise figure of 8 dB in
its maximum gain state, with output IP3 of up to
+46 dBm. The HMC993LP5E is housed in a RoHS
compliant 5x5 mm QFN leadless package.
Electrical Specifications,
T_A = +25° C, 50 Ohm System, VDD = DETVDD = +5V ^[1]
AUTOMATIC
GAIN
Parameter
Gain (min. Attenuation)
1 Attenuator Operation
2 Attenuator Operation
CONTROL
Frequency
Min.
0.9 GHz
1.9 GHz
2.4 GHz
2.8 GHz
0.9 GHz
1.9 GHz
2.4 GHz
-
Typ.
36
26
23
20
32
21
17
SMT
Max.
Units
dB
dB
dB
dB
dB
dB
dB
0.9 GHz
21
1 Attenuator Operation
1.9 GHz
2.4 GHz
22
23
dB
Gain Control Range
2.8 GHz
24
0.9 GHz
43
2 Attenuator Operation
1.9 GHz
33
dB
2.4 GHz
28
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
1
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]