HMC861LP3E Datasheet, PDF (1/8 Pages) Hittite Microwave Corporation – 13 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1, 3)

v00.0310
HMC861LP3E
13 GHz LOW NOISE PROGRAMMABLE
DIVIDER (N = 1, 3)
Typical Applications
4
The HMC861LP3E is ideal for:
• Satellite Communication Systems
• Point-to-Point & Point-to-Multi-Point Radios
• Military Applications
• Test Equipment
Functional Diagram
Features
Low Noise Floor: -152 dBc/Hz at 100 kHz offset
Programmable Frequency Divider, N = 1 or 3
Wide Bandwidth 100 MHz to 13 GHz
16 Lead 3X3 mm SMT Package: 9mm²
General Description
The HMC861LP3E is a low noise programmable
frequency divider in a 3 x 3 mm leadless
surface mount package. The divider can be
programmed to divide from N = 1,3 in the
100 MHz to 13 GHz input frequency range. The low
phase noise and wide frequency range make this
device ideal for high performance and wide band
communication systems.
4-1
Electrical Specifications, T_A = +25 °C, Vcc1 = Vcc2 = +5V
Parameter
RF Input Characteristics
Max RF Input Frequency
Min RF Input Frequency [1]
RF Input Power Range
Divider Output Characteristics
Output Power
Divider Ratio N
SSB Phase Noise @ 100 kHz Offset
Conditions
Sine Wave or Square Wave Input
Sine Wave or Square Wave Input
(see the Pout plots for each division ratio)
Fin = 6 GHz, Pin = 0 dBm, N = 1
Min.
Typ.
Max.
Units
13
GHz
0.1
GHz
-10
0
10
dBm
2
dBm
1
3
-152
dBc/Hz
SSB Phase Noise @ 100 kHz Offset
Fin = 6 GHz, Pin = 0 dBm, N = 3
-153
dBc/Hz
Logic Inputs
VIH Input High Voltage
3
5
V
VIL Input Low Voltage
0
0.4
V
Power Supplies
Vcc1, Vcc2
Analog Supply (See pin description table)
4.75
5
5.25
V
Current Consumption
N = 1, S0 = L
125
mA
Icc
N = 3, S0 = H
180
mA
Control Bits
1
Bit
[1] Square wave input waveform is recommended below 400 MHz for best phase noise performance. If sine wave input waveform is used below
400 MHz, it is recommended that power input is > +5 dBm for best operation including phase noise performance.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]