English
Language : 

HMC742LP5_09 Datasheet, PDF (1/12 Pages) Hittite Microwave Corporation – 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 70 MHz - 4 GHz
HMC742LP5E
v03.0709
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, 70 MHz - 4 GHz
Typical Applications
The HMC742LP5E is ideal for:
• Cellular/3G Infrastructure
• WiBro / WiMAX / 4G
• Microwave Radio & VSAT
• Test Equipment and Sensors
• IF & RF Applications
13
Functional Diagram
Features
-19.5 to 12 dB Gain Control in 0.5 dB Steps
Power-up State Selection
High Output IP3: +39 dBm
TTL/CMOS Compatible
Serial, Parallel, or latched Parallel Control
±0.25 dB Typical Gain Step Error
Single +5V Supply
32 Lead 5x5mm SMT Package: 25mm2
General Description
The HMC742LP5E is a digitally controlled variable gain
amplifier which operates from 70 MHz to 4 GHz, and can
be programmed to provide from -19.5 dB attenuation,
to 12 dB of gain, in 0.5 dB steps. The HMC742LP5E
delivers noise figure of 4 dB in its maximum gain state,
with output IP3 of up to +39 dBm in any state. The dual
mode gain control interface accepts either a three-wire
serial input or a 6 bit parallel word. The HMC742LP5E
also features a user selectable power up state and a
serial output for cascading other serially controlled
Hittite components. The HMC742LP5E is housed in
an RoHS compliant 5x5 mm QFN leadless package,
and requires minimal external components.
13 - 108
Electrical Specifications, TA = +25° C, 50 Ohm System Vdd = +5V, Vs= +5V
Parameter
Min.
Typ.
Max.
70 - 1000
Min.
Typ.
Max.
Units
500 - 4000
MHz
Gain (Maximum Gain State)
12
9
dB
Gain Control Range
31.5
31.5
dB
Input Return Loss
15
12
dB
Output Return Loss
14
10
dB
70 MHz - 350 MHz
Gain Accuracy: (Referenced to Maximum Gain State)
All Gain States
± (0.3 + 4% of relative gain setting) Max
± (0.3 + 4% of relative gain setting) Max
350 MHz - 1000 MHz
dB
± (0.3 + 6% of relative gain setting) Max
Output Power for 1 dB Compression
21.5
22
dBm
Output Third Order Intercept Point
40
(Two-Tone Output Power= 12 dBm Each Tone)
39
dBm
Noise Figure (Max Gain State)
4
4.5
dB
Switching Characteristics tRISE, tFall (10 / 90% RF)
70
tON, tOFF (Latch Enable to 10 / 90% RF)
170
70
ns
170
ns
Supply Current (Amplifier)
Supply Current (Controller) Idd
130
150
190
130
150
190
mA
1.0
2.0
3.0
1.0
2.0
3.0
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com