HMC682LP6C Datasheet, PDF (1/10 Pages) Hittite Microwave Corporation – HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz

HMC682LP6C / 682LP6CE
v00.0308
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz
Typical Applications
9
The HMC682LP6C(E) is Ideal for:
• Cellular/3G & LTE/WiMAX/4G
• Basestations & Repeaters
• GSM, CDMA & OFDM
• Dual Density Receivers
Functional Diagram
Features
High Input IP3: +25 dBm
Conversion Gain: 6 dB
Low LO Drive: 0 dBm
High Channel Isolation
40 Lead 6x6mm SMT Package: 36mm²
General Description
The HMC682LP6C(E) is a high linearity, dual channel
downconverter with integrated LO amplifier in a 6x6
SMT QFN package covering 1.7 - 2.2 GHz. Excellent
input IP3 performance of +25 dBm for down conversion
is provided for 3G & 4G GSM/CDMA applications at
an LO drive of 0 dBm. With an input 1 dB compression
of +15 dBm, the RF port will accept a wide range of
input signal levels. Conversion gain is 6 dB typical.
The 60 - 400 MHz IF frequency response will satisfy
various GSM/CDMA receive frequency plans.
9-1
Electrical Specifications, T_A = +25 °C, IF = 200 MHz, LO = 0 dBm
Vcc1, 2 = Vcc_BAL1, 2 = Vcc_AMP1, 2 ^[1] = Vcc_IF1P, N = Vcc_IF2P, N = +5V, BIAS1, 2 = +2.5V
Parameter
Min.
Typ.
Frequency Range, RF
1.7 - 2.2
Frequency Range, LO
1.4 - 2.0
Frequency Range, IF
0.06 - 0.40
Conversion Gain
4
6
Noise Figure (SSB)
12
LO to RF Isolation
17
25
LO to IF Isolation
15
22
RF to IF Isolation
15
30
IP3 (Input)
25
1 dB Compression (Input)
15
Channel to Channel Isolation
55
LO Drive Input Level (Typical)
-3 to +3
Supply Current (Icc)
450
[1] See application circuit [2] Unless otherwise noted all measurements with low side LO & IF = 200 MHz.
Max.
550
Units
GHz
GHz
GHz
dB
dB
dB
dB
dB
dBm
dBm
dB
dBm
mA
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]