HMC409LP4 Datasheet, PDF (1/8 Pages) Hittite Microwave Corporation – GaAs InGaP HBT 1 WATT POWER AMPLIFIER, 3.3 - 3.8 GHz

v01.0705
5
Typical Applications
This amplifier is ideal for use as a power
amplifier for 3.3 - 3.8 GHz applications:
• WiMAX 802.16
• Fixed Wireless Access
• Wireless Local Loop
Functional Diagram
HMC409LP4 / 409LP4E
GaAs InGaP HBT 1 WATT
POWER AMPLIFIER, 3.3 - 3.8 GHz
Features
Gain: 31 dB
40% PAE @ +32.5 dBm pout
2% EVM @ Pout = +22 dBm
with 54Mbps OFDM Signal
+46 dBm Output IP3
Integrated Power Control (Vpd)
Single +5V Supply
General Description
The HMC409LP4 & HMC409LP4E are high efficiency
GaAs InGaP HBT MMIC Power amplifiers operating
from 3.3 to 3.8 GHz. The amplifier is packaged in a
low cost, leadless SMT package. Utilizing a minimum
of external components the amplifier provides 31 dB
of gain and +32.5 dBm of saturated power from a
+5.0V supply voltage. The power control (Vpd) can be
used for full power down or RF output power/current
control. For +22 dBm OFDM output power (64 QAM,
54 Mbps), the HMC409LP4 & HMC409LP4E achieve
an error vector magnitude (EVM) of 2%, meeting
WiMAX 802.16 linearity requirements.
5 - 166
Electrical Specifications, T_A = +25° C, Vs = +5V, Vpd = +5V, Vbias=+5V
Frequency Range
Parameter
Min. Typ. Max.
3.3 - 3.4
Min. Typ. Max.
3.4 - 3.6
Min. Typ. Max.
3.6 - 3.8
Units
GHz
Gain
30
32
29 31.5
28
30
dB
Gain Variation Over Temperature
0.04 0.05
0.04 0.05
0.035 0.045 dB/ °C
Input Return Loss
10
15
15
dB
Output Return Loss
13
14
10
dB
Output Power for 1dB Compression (P1dB)
28
30
28 30.5
28 30.5
dBm
Saturated Output Power (Psat)
Output Third Order Intercept (IP3) ^[2]
Error Vector Magnitude @ 3.5 GHz
(54 Mbps OFDM Signal @ +22 dBm Pout)
32
41
45
32.5
42 45.5
2
32
41
45
dBm
dBm
%
Noise Figure
5.8
5.8
6
dB
Supply Current (Icq)
Vs= Vcc1 + Vcc2= +5V
615
615
615
mA
Control Current (Ipd)
Vpd = +5V
4
4
4
mA
Switching Speed
tOn, tOff
20
20
20
ns
Bias Current (Ibias)
10
10
10
mA
Note 1: Specifications and data reflect HMC409LP4 measured using the application circuit found herein. Contact the HMC Applications Group for assis-
tance in optimizing performance for your application.
Note 2: Two-tone output power of +15 dBm per tone, 1 MHz spacing.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com