HMC393MS8G Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – GaAs MMIC DPDT DIVERSITY SWITCH, 5.0 - 6.0 GHz

v01.0301
MICROWAVE CORPORATION
Typical Applications
This switch is ideal for use as a DPDT Diversity
Switch for 5.0 - 6.0 GHz applications:
• HiperLAN
• UNII
Functional Diagram
14
HMC393MS8G
GaAs MMIC DPDT DIVERSITY
SWITCH, 5.0 - 6.0 GHz
Features
Low Insertion Loss: 1.2 dB @ 5.5 GHz
High IP3: 49 dBm
Positive Control: 0/+5V
Ultra Small MSOP8G Package: 14.8 mm²
General Description
The HMC393MS8G is a low cost C-band DPDT
switch that operates between 5.0 and 6.0 GHz.
This switch can operate as an integrated antenna
diversity and transmit/receive switch for the
HyperLAN and UNII radio platforms. The design
provides 20 dB of isolation between antennas
and between Tx and Rx ports. The switch fea-
tures 1.2 dB insertion loss and high power han-
dling capability. Switch state is controlled using
four CMOS level control voltage lines.
Electrical Specifications, T_A = +25° C, Vctl = 0/+5 Vdc, 50 Ohm System
Parameter
Frequency
Min.
Typ.
Insertion Loss
5.0 - 6.0 GHz
1.2
Isolation
5.0 - 6.0 GHz
15
20
Return Loss (On State, Any Port)
5.0 - 6.0 GHz
13
20
Input Power for 0.1 dB Compression
5.0 - 6.0 GHz
27
30
Input Third Order Intercept
(Two-Tone Input Power = +22 dBm Each Tone)
5.0 - 6.0 GHz
45
49
Switching Characteristics
5.0 - 6.0 GHz
tRISE / tFALL (10/90% RF)
11
tON / tOFF (50% CTL to 10/90% RF)
22
Max.
2.0
Units
dB
dB
dB
dBm
dBm
ns
ns
14 - 218
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com