HMC392_09 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz

v02.0907
1
Typical Applications
The HMC392 is ideal for:
• Point-to-Point Radios
• VSAT
• LO Driver for HMC Mixers
• Military EW, ECM, C³I
• Space
Functional Diagram
HMC392
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
Features
Gain: 15.5 dB
Noise Figure: 2.4 dB
Single Supply Voltage: +5V
50 Ohm Matched Input/Output
No External Components Required
Small Size: 1.3 x 1.0 x 0.1 mm
General Description
The HMC392 is a GaAs MMIC Low Noise Amplifier
die which operates between 3.5 and 7.0 GHz. The
amplifier provides 15.5 dB of gain, 2.4 dB noise figure,
and 28 dBm IP3 from a +5V supply voltage. The
HMC392 has six bonding adjustment options which
allow the user to select the bias point and output
power of the device (+15 to +18 dBm). The HMC392
amplifier can easily be integrated into Multi-Chip-
Modules (MCMs) due to its small (1.3 mm²) size. All
data is with the chip in a 50 Ohm test fixture connected
via 0.025mm (1 mil) diameter wire bonds of minimal
length 0.31mm (12 mils).
Electrical Specifications, T_A = +25° C, Vdd = 5V
Parameter
Min.
Typ.
Max. Min.
Typ.
Max.
Frequency Range
4.0 - 6.0
3.5 - 7.0
Gain
Gain Variation Over Temperature
Noise Figure
Input Return Loss
Output Return Loss
Output Power for 1 dB Compression (P1dB)
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)
Supply Current (Idd)
13
15.5
19
11.5
14
19
0.018 0.025
0.018
0.025
2.4
3.0
2.8
3.4
15
10
15
10
13
16
12
16
18
18
25
28
23
28
50
66
50
66
Units
GHz
dB
dB/ °C
dB
dB
dB
dBm
dBm
dBm
mA
1 - 20
Note: Data taken with pads PS4 and PS8 bonded to ground (state 5) unless otherwise noted.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com