HMC392 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz

v00.1002
MICROWAVE CORPORATION
1
Typical Applications
The HMC392 is ideal for use as a low noise
amplifier for:
• Point to Point Radios
• VSAT
• LO Driver for HMC Mixers
• Military EW, ECM, C³I
• Space
Functional Diagram
HMC392
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
Features
Gain: 15.5 dB
Noise Figure: 2.4 dB
Single Supply Voltage: +5.0V
50 Ohm Matched Input/Output
No External Components Required
Small Size: 1.3 mm x 1.0 mm x 0.1 mm
General Description
The HMC392 is a GaAs MMIC Low Noise
Amplifier die which operates between 3.5 and 7.0
GHz. The amplifier provides 15.5 dB of gain, 2.4
dB noise figure, and 28 dBm IP3 from a +5.0V
supply voltage. The HMC392 has six bonding
adjustment options which allow the user to select
the bias point and output power of the device (+15
to +18 dBm). The HMC392 amplifier can easily
be integrated into Multi-Chip-Modules (MCMs)
due to its small (1.3 mm²) size. All data is with
the chip in a 50 Ohm test fixture connected via
0.025mm (1 mil) diameter wire bonds of minimal
length 0.31mm (12 mils).
1 - 30
Electrical Specifications, T_A = +25° C, Vdd = 5V
Parameter
Min.
Typ.
Max.
Min.
Frequency Range
4.0 - 6.0
Gain
13
15.5
11.5
Gain Variation Over Temperature
0.018
0.025
Noise Figure
2.4
3.0
Input Return Loss
15
Output Return Loss
15
Output Power for 1 dB Compression (P1dB)
13
16
12
Saturated Output Power (Psat)
18
Output Third Order Intercept (IP3)
25
28
23
Supply Current (Idd)
50
Note: Data taken with pads PS4 and PS8 bonded to ground (state 5) unless otherwise noted.
Typ.
Max.
3.5 - 7.0
14
0.018
0.025
2.8
3.4
10
10
16
18
28
50
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com
Units
GHz
dB
dB/ °C
dB
dB
dB
dBm
dBm
dBm
mA