HMC389LP4_08 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – MMIC VCO w/ BUFFER AMPLIFIER, 3.35 - 3.55 GHz

v03.0507
Typical Applications
Low noise MMIC VCO w/Buffer Amplifier for:
• Wireless Local Loop (WLL)
• VSAT & Microwave Radio
• Test Equipment & Industrial Controls
• Military
Functional Diagram
11
HMC389LP4 / 389LP4E
MMIC VCO w/ BUFFER
AMPLIFIER, 3.35 - 3.55 GHz
Features
Pout: +4.7 dBm
Phase Noise: -112 dBc/Hz @100 KHz
No External Resonator Needed
Single Supply: 3V @ 41 mA
QFN Leadless SMT Package, 16 mm²
General Description
The HMC389LP4 & HMC389LP4E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC VCOs
with integrated resonators, negative resistance
devices, varactor diodes, and buffer amplifiers.
Covering 3.35 to 3.55 GHz, the VCO’s phase noise
performance is excellent over temperature, shock,
vibration and process due to the oscillator’s mono-
lithic structure. Power output is 4.7 dBm typical from
a single supply of 3V @ 41mA. The voltage controlled
oscillator is packaged in a low cost leadless QFN 4x4
mm surface mount package.
11 - 32
Electrical Specifications, T_A = +25° C, Vcc = +3V
Parameter
Min.
Frequency Range
Power Output
1.5
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RF Output
Tune Voltage (Vtune)
0
Supply Current (Icc) (Vcc = +3.0V)
Tune Port Leakage Current
Output Return Loss
Harmonics
2nd
3rd
Pulling (into a 2.0:1 VSWR)
Pushing @ Vtune= +5V
Frequency Drift Rate
Typ.
3.35 - 3.55
4.7
-112
41
6
-7
-16
3.3
-3
0.4
Max.
10
10
Units
GHz
dBm
dBc/Hz
V
mA
μA
dB
dBc
dBc
MHz pp
MHz/V
MHz/°C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com