HMC372LP3 Datasheet, PDF (1/8 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC LOW NOISE AMPLIFIER, 700 - 1000 MHz

v01.0604
MICROWAVE CORPORATION
HMC372LP3
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
8
8 - 124
Typical Applications
The HMC372LP3 is ideal for
basestation receivers:
• GSM, GPRS & EDGE
• CDMA & W-CDMA
• Private Land Mobile Radio
Functional Diagram
Features
Noise Figure: <1.0 dB
+34 dBm Output IP3
Gain: 15 dB
Very Stable Gain vs. Supply & Temperature
Single Supply: +5.0 V @ 100 mA
50 Ohm Matched Output
General Description
The HMC372LP3 is a GaAs PHEMT MMIC Low
Noise Amplifier that is ideal for GSM & CDMA
cellular basestation front-end receivers operating
between 700 and 1000 MHz. The amplifier has
been optimized to provide 1.0 dB noise figure, 15
dB gain and +34 dBm output IP3 from a single
supply of +5.0V @ 100 mA. Input and output return
losses are 25 and 14 dB respectively with the LNA
requiring only four external components to optimize
the RF Input match, RF ground and DC bias. The
HMC372LP3 shares the same package and pinout
with the HMC356LP3 high IP3 LNA. A low cost,
leadless 3x3 mm (LP3) SMT QFN package houses
the low noise amplifier.
Electrical Specifications, T_A = +25° C, Vs = +5V
Parameter
Min.
Typ.
Max.
Frequency Range
810 - 960
Gain
12.5
14.5
Gain Variation Over Temperature
0.008
0.015
Noise Figure
1.0
1.3
Input Return Loss
25
Output Return Loss
14
Reverse Isolation
20
Output Power for 1dB Compression (P1dB)
18
21
Saturated Output Power (Psat)
23.5
Output Third Order Intercept (IP3)
(-20 dBm Input Power per tone, 1 MHz tone spacing)
34
Supply Current (Idd)
100
Min.
Typ.
Max.
700 - 1000
11.5
14.5
0.008
0.015
1.0
1.3
25
12
22
17
20
22.5
Units
MHz
dB
dB / °C
dB
dB
dB
dB
dBm
dBm
30
33
dBm
100
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com