HMC365_09 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – GaAs HBT MMIC DIVIDE-BY-4, DC - 13 GHz

v05.0109
1
Typical Applications
Prescaler for DC to Ku Band PLL Applications:
• Satellite Communication Systems
• Fiber Optic
• Piont-to-Point and Point-to-Multi-Point Radios
• VSAT
Functional Diagram
HMC365
GaAs HBT MMIC
DIVIDE-BY-4, DC - 13 GHz
Features
Ultra Low SSB Phase Noise: -151 dBc/Hz
Wide Bandwidth
Output Power: 5 dBm
Single DC Supply: +5V
Small Size: 1.30 x 0.69 x 0.1 mm
General Description
The HMC365 is a low noise Divide-by-4 Static Divider
with InGaP GaAs HBT technology that has a small
size of 1.30 x 0.69 mm. This device operates from
DC (with a square wave input) to 13 GHz input
frequency with a single +5V DC supply. The low
additive SSB phase noise of -151 dBc/Hz at 100 kHz
offset helps the user maintain good system noise
performance.
Electrical Specifications, T_A = +25° C, 50 Ohm System, Vcc = 5V
Parameter
Conditions
Min.
Maximum Input Frequency
Minimum Input Frequency
13
Sine Wave Input. ^[1]
Input Power Range
Fin = 1 to 10 GHz
-15
Fin = 10 to 12 GHz
-10
Output Power ^[2]
Fin = 12 to 13 GHz
-5
Fin = 13 GHz
2
Reverse Leakage
Both RF Outputs Terminated
SSB Phase Noise (100 kHz offset)
Pin = 0 dBm, Fin = 6 GHz
Output Transition Time
Supply Current (Icc) ^[2]
Pin = 0 dBm, Fout = 882 MHz
[1] Divider will operate down to DC for square-wave input signal.
[2] When operated in high power mode (pin 8 connected to ground).
Typ.
14
0.2
>-20
>-15
>-8
5
45
-151
100
110
Max.
0.5
+10
+3
+3
Units
GHz
GHz
dBm
dBm
dBm
dBm
dB
dBc/Hz
ps
mA
1 - 26
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com