HMC362_09 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – GaAs HBT MMIC DIVIDE-BY-4, DC - 11 GHz

v04.0109
1
Typical Applications
Prescaler for DC to X Band PLL Applications:
• Satellite Communication Systems
• Fiber Optic
• Point-to-Point and Point-to-Multi-Point Radios
• VSAT
Functional Diagram
HMC362
GaAs HBT MMIC
DIVIDE-BY-4, DC - 11 GHz
Features
Ultra Low SSB Phase Noise: -149 dBc/Hz
Wide Bandwidth
Output Power: -6 dBm
Single DC Supply: +5V
Small Size: 1.30 x 0.69 x 0.1 mm
General Description
The HMC362 is a low noise Divide-by-4 Static Divider
with InGaP GaAs HBT technology that has a small
size of 1.30 x 0.69 mm. This device operates from DC
(with a square wave input) to 11 GHz input frequency
with a single +5V DC supply. The low additive SSB
phase noise of -149 dBc/Hz at 100 kHz offset helps the
user maintain good system noise performance.
Electrical Specifications, T_A = +25° C, 50 Ohm System, Vcc= 5V
Parameter
Maximum Input Frequency
Minimum Input Frequency
Conditions
Sine Wave Input. ^[1]
Min.
Typ.
11
12
0.2
Input Power Range
Fin = 1 to 8 GHz
-15
Output Power ^[2]
Fin = 8 to 11 GHz
-10
Fin = 11 GHz
-9
Reverse Leakage
Both RF Outputs Terminated
SSB Phase Noise (100 kHz offset)
Pin = 0 dBm, Fin = 6 GHz
Output Transition Time
Supply Current (Icc) ^[2]
Pin = 0 dBm, Fout = 882 MHz
[1] Divider will operate down to DC for square-wave input signal.
[2] When operated in low power mode (pin 8 floating).
>-20
>-15
-6
40
-149
100
68
Max.
0.5
+10
+2
Units
GHz
GHz
dBm
dBm
dBm
dB
dBc/Hz
ps
mA
1-8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com