HMC361G8 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC

v00.1111
Typical Applications
Prescaler for 10 MHz to 13 GHz PLL Applications:
• Point-to-Point / Multi-Point Radios
• VSAT Radios
• Fiber Optic
• Test Equipment
• Space & Military
Functional Diagram
HMC361G8
SMT GaAs HBT MMIC
DIVIDE-BY-2, 0.01 - 13 GHz
Features
Ultra Low SSB Phase Noise: -148 dBc/Hz
Wide Bandwidth
Output Power: 3 dBm
Single DC Supply: +5V
8 Lead Hermetic SMT Package
General Description
The HMC361G8 is a low noise N = 2 static divider in
an 8 lead glass/metal surface mount (hermetic) pack-
age. This device operates from 10 MHz (with a square
wave input) to 13 GHz input frequency with a single
+5V DC supply. The low additive SSB phase noise of
-148 dBc/Hz at 100 kHz offset helps the user maintain
good system noise performance.
Electrical Specifications, T_A = +25° C, 50 Ohm System, Vcc= 5V
Parameter
Maximum Input Frequency
Minimum Input Frequency
Minimum Input Frequency
Input Power Range
Output Power
Conditions
Sine Wave or Square Wave input
Sine Wave or Square Wave Input. {1}
Square Wave {1} {2}
Fin = 0.01 to 0.20 GHz (square wave)
Fin = 0.20 to 0.5 GHz (sine)
Fin = 0.5 to 1 GHz (sine)
Fin = 1 to 8 GHz (sine)
Fin = 8 to 11 GHz (sine)
Fin = 8 - 13 GHz (sine)
Fin = 0.20 GHz
Fin = 6 GHz
Fin = 9 GHz
Min.
Typ.
Max.
13
0.20
0.01
-10
10
0
10
-10
10
-15
10
-15
2
-15
0
4.5
3.6
1.6
Units
GHz
GHz
GHz
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
Fin = 13 GHz
-2.5
dBm
Reverse Leakage
Both RF Outputs Terminated
40
dB
SSB Phase Noise (100 kHz offset)
Pin = 0 dBm, Fin = 6 GHz (sine)
-148
dBc/Hz
Output Transition Time
Pin = 0 dBm, Fout = 882 MHz
100
ps
Supply Current (Icc) (Vcc = +5V)
84
mA
1. Divider will operate down to 0.01 GHz with a square-wave input signal.
2. Square wave input waveform is recommended for operation below 200 MHz. Recommended transitions times are < 100 ps.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
1
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]