HMC334LP4 Datasheet, PDF (1/8 Pages) Hittite Microwave Corporation – SiGe WIDEBAND DOWNCONVERTER, 0.8 - 2.7 GHz

HMC334LP4 / 334LP4E
v00.0407
SiGe WIDEBAND
DOWNCONVERTER, 0.8 - 2.7 GHz
Typical Applications
The HM334LP4 / HMC334LP4E is ideal for Wireless
Infrastructure Applications:
• Basestations & Repeaters
• GSM, GPRS & Edge
8
• CDMA, W-CDMA & TD-SCDMA
• WiMAX & WiBro
Functional Diagram
Features
Conversion Loss: 0 dB
LO to RF Isolation: 48 dB
Single-Ended LO Drive: -6 dBm
Input IP3: +26 dBm
SSB Noise Figure: 10.5 dB
On-Chip RF Balun
RoHS Compliant 4x4mm QFN Package
General Description
The HMC334LP4 & HMC334LP4E are low noise,
wideband downconverter RFICs which are ideal
for Cellular/3G and WiMAX/4G applications from
0.8 to 2.7 GHz. The LO input accepts drive levels
from -6 to +6 dBm while the RFIC provides 48 dB of
LO to RF isolation, and 0 dB conversion loss. The
HMC334LP4(E) will support an IF output bandwidth
of up to 600 MHz and consumes only 173mA from
a +5.0V supply. This wideband active mixer also
provides excellent performance in the presence of
high level “Blocker” signals, making it ideal for receiver
applications in demanding environments.
Electrical Specifications,
T_A = +25° C, LO = 0 dBm @ 1650 MHz, VSLO = VSIF = +5V, IF = 240 MHz, IF Load = 400 Ohms
Parameter
Min.
Typ.
Max.
Units
Frequency Range, RF
0.8 - 2.7
GHz
Frequency Range, LO
0.01 - 3.3
GHz
Frequency Range, IF
1 - 600
MHz
Conversion Gain (IF XFMR Included)
-5
-1
dB
SSB Noise Figure
10.5
dB
LO to RF Isolation
30
48
dB
IF Output Impedance (Diff)
400
Ohms
IP3 (Input)
+26
dBm
1 dB Compression (Input)
8.5
12
dBm
LO Drive Input Level
-6 to +6
dBm
Supply Current
173
225
mA
Unless otherwise noted all measurements with low side LO
8 - 232
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com