HMC262 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – GaAs MMIC LOW NOISE AMPLIFIER 15 - 24 GHz

MICROWAVE CORPORATION
HMC262
GaAs MMIC LOW NOISE AMPLIFIER 15 - 24 GHz
FEBRUARY 2001
Features
General Description
V01.05.00
EXCELLENT NOISE FIGURE : 2 dB
The HMC262 chip is a GaAs MMIC Low Noise
1
Amplifier (LNA) which covers the frequency
STABLE GAIN VS TEMPERATURE: 25 dB ±1.5 dB _{range of 15 to 24 GHz. The chip can easily be}
SINGLE SUPPLY : +3V@ 36mA
integrated into Multi-Chip Modules (MCMs) due
to its small (2.75 mm2) size. The chip utilizes a
SMALL SIZE: 1.32 mm x 2.08 mm
GaAs PHEMT process offering 25 dB gain from
a single bias supply of + 3V @ 36 mA with a
noise figure of 2 dB. This LNA can be used in
microwave & millimeter wave point-to-point ra-
dios, VSAT, and other SATCOM applications.
All data is with the chip in a 50 ohm test fixture
connected via 0.025 mm (1 mil) diameter wire
bonds of minimal length 0.31 mm (<12 mils). The
HMC262 may be used in conjunction with
HMC203, HMC258, HMC264, or HMC265 mix-
ers to realize a microwave or millimeterwave
system receiver.
Guaranteed Performance, Vdd = +3V, -55 to +85 deg C
Parameter
Frequency Range
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units
15 - 17
17 - 20
20 - 24
GHz
Gain
19 24
19 25
15 20
dB
Noise Figure
2.8 5.0
2.0 3.7
2.2 3.9 dB
Input Return Loss
5
4 10
6 12
dB
Output Return Loss
7 16
5 12
6
dB
Reverse Isolation
39 45
37 42
35 40
dB
Output Power for 1dB Compression (P1dB) -1 3
1 4.5
0
4
dBm
Saturated Output Power (Psat)
3
8
48
2
6
dBm
Output Third Order Intercept (IP3)
8 13
9 13
6 10
dBm
Supply Voltage (Vdd)
2.75 3.0 3.25 2.75 3.0 3.25 2.75 3.0 3.25 Vdc
Supply Current (Idd) (Vdd= +3V)
36 48
36 48
36 48 mA
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone]
1 - 16
Fax: [phone]
Web Site: www.hittite.com