HMC128_09 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – GaAs MMIC DOUBLE-BALANCED MIXER, 1.8 - 5.0 GHz

v03.1007
Typical Applications
The HMC128 is ideal for:
• Microwave & VSAT Radios
• Test Equipment
• Military EW, ECM, C³I
• Space Telecom
4
Functional Diagram
HMC128
GaAs MMIC DOUBLE-BALANCED
MIXER, 1.8 - 5.0 GHz
Features
Conversion Loss: 7 dB
LO to RF and IF Isolation: >36 dB
Input IP3: +18 dBm
No DC Bias Required
Die Size: 1.45 x 1.45 x 0.1 mm
General Description
The HMC128 is a miniature double-balanced mixer
chip that can be used as an upconverter or downcon-
verter. The device is a passive diode/balun type mixer
with high dynamic range. Noise figure is essentially
equal to the conversion loss. The mixer can handle
larger signal levels than active mixers due to the high
third order intercept. MMIC implementation provides
exceptional balance in the circuit resulting in high LO/
RF and LO/IF isolations. This mixer can operate over
a wide LO Drive input of +9 to +15 dBm.
Electrical Specifications, T_A = +25° C, LO Drive = +15 dBm*
Parameter
Min.
Frequency Range, RF & LO
Frequency Range, IF
Conversion Loss
Noise Figure (SSB)
LO to RF Isolation
35
LO to IF Isolation
27
IP3 (Input)
15
IP2 (Input)
45
1 dB Gain Compression (Input)
5
* Unless otherwise noted, all measurements performed as downconverter, IF = 100 MHz
Typ.
1.8 - 5.0
DC - 3
7
7
42
36
18
50
10
Max.
10
10
Units
GHz
GHz
dB
dB
dB
dB
dBm
dBm
dBm
4-2
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com