HMC-VVD106 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – GaAs PIN MMIC VOLTAGE-VARIABLE ATTENUATOR, 36 - 50 GHz

v01.0209
1
Typical Applications
This HMC-VVD106 is ideal for:
• Short Haul / High Capacity Radios
• Automotive Radar
• Test Equipment
• SATCOM
• Military
• Point-to-Point Radios
• Point to Multi-Point Radios
HMC-VVD106
GaAs PIN MMIC VOLTAGE-VARIABLE
ATTENUATOR, 36 - 50 GHz
Features
Low Insertion Loss: 1.5 dB
Wide Dynamic Range: 22 dB
Balanced Topology
High Input IP3: +17 dBm
Analog Control Voltage: 0 to +4V
Die Size: 1.47 x 1.5 x 0.1 mm
Functional Diagram
General Description
The HMC-VVD106 is a monolithic GaAs PIN diode
based Voltage Variable Attenuator (VVA) which
exhibits low insertion loss, high IP3, and wide dynamic
range. The balanced topology delivers excellent
return loss while the single control voltage can be
applied to either side of the die. All bond pads and
the die backside are Ti/Au metallized, and the PIN
diode devices are fully passivated for reliable
operation. This wideband VVA MMIC is compatible
with conventional die attach methods, as well as
thermocompression and thermosonic wirebonding,
making it ideal for MCM and hybrid microcircuit
applications. All data shown herein is measured on
chip in a 50 Ohm environment and contacted with
RF probes.
Electrical Specifications, T_A = +25 °C, 50 Ohm System
Parameter
Min.
Typ.
Frequency Range
36 - 50
Insertion Loss
1.5
Attenuation Range
21
Return Loss
15
IM3 @ Pin = 0 dBm / Tone
30
*Unless otherwise indicated, all measurements are from probed die
Max.
2
Units
GHz
dB
dB
dB
dBc
1 - 40
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com