English
Language : 

HVP100 Datasheet, PDF (1/2 Pages) HITRON ELECTRONICS CORPORTION – UNIVERSAL INPUT HARMONIC CORRECTION AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES
H HiTRON
UNIVERSAL INPUT HARMONIC CORRECTION
AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS
INTERNAL SWITCHING POWER SUPPLIES HVP100 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES
MEET IEC 61000-3-2 HARMONIC CORRECTION
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET CISPR PUB. 22 CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Typ. 90-264Vac with PFC.
Input Connector: B-S connector.
Input Frequency: 47-63Hz.
Inrush Current: Typ. 20A @230Vac (active).
Input Current: 1.6A@115Vac, 0.6A@230Vac.
Dielectric Withstand: Meet IEC 60950-1.
EMI: Meet CISPR PUB. 22 Class B.
Hold-up Time: Typ. 30mS @ 115Vac & 230Vac.
Power Fail Signal: Installed.
Power Factor Correction: Meet Harmonic Correction
per IEC 61000-3-2.PF typ. 0.98.
Earth Leakage: Less than 0.5mA.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connector: B-S connector.
Output Wattage: Typ. 100 Watts.
Line Regulation: Typ. 1.0%.
Load Regulation: Main VO1 typ. ±1.0%.
Noise & Ripple: Typ. 1.0% peak to peak.
OVP: Built-in at main VO1 only.
Remote Sense: Installed in VO1.
Adjustability: Available at main O/P VO1.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
OLP set at about 125-150% rating output wattage.
Consult the factory for OLP setting.
GENERAL SPECIFICATION
Efficiency: Typ. 74-79%.
Operating Temperature: 0 to +50°C.
Switching Frequency: Fixed frequency at 85 or 80K Hz. Storage Temperature: -20 to +85°C.
Circuit Topology: PWM fixed frequency forward circuit. Temperature Coefficient: Typ. 0.04% /°C.
Transient Response: Output voltage returns in
Cooling: Free air convection.
less than 3mS following
Recommended 20cfm fan cooling for full load.
a 25% load change.
Construction: Enclosure box or L-bracket format.
Safety Standard: UL 60950-1/EN 60950-1 Class I.
Power Density: 2.16Watts / Cubic Inch.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
-43-
For the details of safety approval, please consult the factory.