HID60 Datasheet, PDF (1/2 Pages) HITRON ELECTRONICS CORPORTION – UNIVERSAL AC INPUT AC-DC INDUSTRIAL DIN-RAIL SINGLE OUTPUT 60 WATTS SWITCHING MODE POWER SUPPLIES

H HiTRON
UNIVERSAL AC INPUT AC-DC INDUSTRIAL DIN-RAIL
SINGLE OUTPUT 60 WATTS SWITCHING MODE
POWER SUPPLIES HID60 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES
MEET UNIVERSAL SAFETY STANDARDS &
INDUSTRIAL UL 508
INDUSTRIAL POWER SUPPLIES FOR
SNAP-ON MOUNTING ON DIN-RAILS
EMI MEET CISPR PUB. 22 & FCC CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Typ. 90-264Vac universal input.
Input Connector: Phoenix GMSTBA2.5/3-G-7.62.
Input Frequency: 47-63Hz.
Inrush Current: Typ. 25A @ 230Vac.
Input Current: Typ. 1.0A/115Vac, 0.5A/230Vac.
Dielectric Withstand: Meet IEC 60950-1.
EMI: Meet CISPR EN 55022 & FCC B.
No Load Operation: No damage.
Hold-up Time: 20mS @ 115Vac/ 110mS @ 230Vac.
Earth Leakage: Less than 0.4mA @ 230Vac.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Charts.
Output Current: See Ratings Charts.
Output Wattage: Typ. 60W continuous.
Output Connector: Phoenix MSTBA2.5/2-G-5.08.
Line Regulation: Typ. 0.1%.
Load Regulation: Vary with output voltages.
Typ. ±1.0%.
Noise & Ripple: Typ. 1% peak to peak.
OVP: Built-in.
Adjustability: Available.
LED Indicator: Installed.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
Typically set at 110-150% max. load.
Consult the factory for special OLP setting.
GENERAL SPECIFICATION
Efficiency: Typ. 75%.
Operating Temperature: -10 to +70°C.
Switching Frequency: Fixed frq. 50K Hz.
Derating from +60 °C to +70°C by derating 2%/°C.
Circuit Topology: Fixed frequency flyback circuit.
Storage Temperature: -25 to +85°C.
Transient Response: Recovers in less than 3mS following Temperature Coefficient: Typ. 0.03% /°C.
a 25% load change.
Cooling: Free air convection cooling for Ta. <+60°C.
Safety Standard: IEC 60950-1/UL 60950-1 Class I.
Moving air is required for Ta. >+60°C full load operation.
Power Density: 2.0Watts / Cubic Inch.
Construction format: Enclosure metal box with
Industrial Grade UL 508.
DIN-clips format.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
-29-
In application