HES15 Datasheet, PDF (1/4 Pages) HITRON ELECTRONICS CORPORTION – AC/DC EXTERNAL WALLMOUNT & DESKTOP ADAPTER UNIVERSAL INPUT MULTIPLE OUTPUT 15-16 WATTS SWITCHING POWER SUPPLIES

H HiTRON
AC/DC EXTERNAL WALLMOUNT & DESKTOP ADAPTER
UNIVERSAL INPUT MULTIPLE OUTPUT 15-16 WATTS
SWITCHING POWER SUPPLIES HES15 SERIES
FEATURES:
SINGLE, DUAL, TRIPLE & QUAD OUTPUT
WALLMOUNT OR DESKTOP ADAPTER
DIVERSE AC PLUGS AVAILABLE
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET EN 55022/FCC CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: 90-264Vac typical.
Input Connector:
Wallmount Format:
WM1,2(USA/JAPAN),WM3( Euro-stecker),
WM4(Schuko-stecker),WM5(UK),WM6 (Australia).
Desktop Format: IEC320-3P Type DT7.
Input Frequency: 47-63Hz.
Inrush Current: 20.0-50.0A typical.
Input Current: 0.3-0.5A @ 115Vac typical.
0.14-0.3A @ 230Vac typical.
Dielectric Withstand: Meet IEC60950.
EMI: Meet EN 55022/FCC Class B.
Hold-up Time: 15mS @115Vac typical.
60mS @230Vac typical.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connection: Optional.
Line Regulation: 0.1% typical.
Load Regulation: Main O/P VO1 ±1.5-3.0% typical.
Aux. O/P VO2 ±2.0-4.0% typical. (Stacked on VO1)
Aux. O/P VO3 ±1.0-2.0% typical. (P.R. installed)
Aux. O/P VO4 ±1.0-2.0% typical. (P.R. installed)
Noise & Ripple: Typical 1%peak to peak.
OVP: Built-in, Zener diode clamping.
Adjustability: Factory set.
Overload Protection:
Typical 125-150% of max. power overrange or
short circuit, power foldback & self-recovering.
GENERAL SPECIFICATION
Efficiency: 65-75% typical.
Operating Temperature: 0 °C to room temperature.
Switching Frequency: Approximate 33K Hz.
Storage Temperature: -20 to +85°C.
Circuit Topology: Fixed Frequency Flyback circuit.
Temperature Coefficient: 0.04% /°C typical.
Transient Response: Output voltage returns in less than Cooling: Free air convection.
0.5mS following a 25% load change. Construction: Impact resistant thermo- plastic
Safety Standard: Meet UL1950/ EN60950 Class I.
enclosure case.
Power Density: 0.68Watts /Cubic inch.
Wallmount or Desktop Format.
NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.
(2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load varied from half load to full load (unit ±%).
For the multi-output, the main output remains 50% load and other aux. output remains 20% load.
(3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 meters) cord AWG#18 wires.
(4) Due to requests in market and advances in technology, specifications subject to change without notice.
-15-
For the details of safety approval, please consult the factory.