HDA41 Datasheet, PDF (1/2 Pages) HITRON ELECTRONICS CORPORTION – 36-72VDC INPUT RANGE DC-DC PCB OPEN FRAME MULTI-OUTPUT 40-50 WATTS INTERNAL SWITCHING POWER CONVERTERS

H HiTRON
36-72VDC INPUT RANGE DC-DC PCB OPEN FRAME
MULTI-OUTPUT 40-50 WATTS INTERNAL SWITCHING
POWER CONVERTERS HDA41 SERIES
FEATURES:
PCB OPEN FRAME FORMAT
LOW PROFILE & COMPACT SIZE
36-72VDC NOMINAL 48VDC INPUT
EMI MEET EN 55022 & FCC CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Typ. 36-72Vdc,
Nominal input 48Vdc.
Input Connector: Molex V-M.
Input Current: 1.4A @ nominal input 48Vdc.
Dielectric Withstand: Meet IEC 60950-1 regulation.
EMI: Meet EN 55022 & FCC Class B.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Wattage: Typ. 45W continuous.
Output Connector: Molex V-M.
Line Regulation: Typ. 0.1-0.5%.
Load Regulation: Main VO1 typ. ±1.0%.
Aux.VO2 typ. ±2.0-3.0%.(Stacked)
Aux. VO3 typ. ±1.0-2.0%.(P.R.)
Noise & Ripple: Typ. 1% peak to peak.
OVP: Built-in at main VO1.
Adjustability: Available at main VO1.
Overload Protection (OLP):
Fully protected against output overload or short circuit.
Typical 125-130% max. load.
Consult the factory for special OLP setting
GENERAL SPECIFICATION
Efficiency: Typ. 75%.
Operating Temperature: 0 to +50°C at full load,
Switching Frequency: 55K Hz.
derating to half @+ 70°C.
Circuit Topology: Fixed Frequency Flyback Circuit.
Storage Temperature: -40°C to +85°C.
Transient Response: Typ. 2mS following a 25%
Temperature Coefficient: ±0.04%/°C.
load change.
Cooling: Convection cooling is adequate. Moving air is
Safety Standard: IEC 60950-1 Class I.
recommended for operating in a confined area.
Power Density: 3.1Watts / Cubic Inch.
Construction: PCB open frame format.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
-67-