HD75161A Datasheet, PDF (1/15 Pages) Hitachi Semiconductor – Octal General Purpose Interface Bus Transceivers

HD75161A
Octal General Purpose Interface Bus Transceivers
ADE-205-591 (Z)
1st. Edition
Dec. 2000
Description
The HD75161A is an 8 channel general purpose interface bus transceiver designed to meet the
requirements of IEEE standard 488-1978. The transceiver is to provide the bus management and data
transfer signals during operating in a controller instrumentation system. When combined with the
HD75160A octal bus transceiver, the HD75161A provides the complete 16 wire interface for the IEEE 488
bus. The HD75161A features eight driver receiver pairs connected in a front to back configureation to
form input/output ports at both the bus and terminal sides. The direction of data through these driver
receiver pairs is determined by the DC and TE enable signals. The device exhibits a high impedance to the
bus when V_CC = 0 V since the bus terminating resistors are built in. If featurs driver outputs which can
handle loads up to 48 mA of sink current. Each receiver features p n p transistor inputs for high input
impedance and guaranteed hysteresis of 400 mV for increased noise immunity.