|
HD74HC564 Datasheet, PDF (1/11 Pages) Hitachi Semiconductor – Octal D-type Flip-Flops (with 3-state outputs) | |||
|
HD74HC564/HD74HC574
Octal D-type Flip-Flops (with 3-state outputs)
Description
These devices are positive edge triggered flip-flops. The difference between HD74HC564 and
HD74HC574 is only that the former has inverting outputs and the latter has noninvertering outputs.
Data at the D inputs, meeting the set-up and hold time requirements, are transferred to the Q or Q outputs
on positive going transitions of the clock (CK) input. when a high logic level is applied to the output cotrol
(OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other
inputs and the state of the storage elements.
Features
⢠High Speed Operation: tpd (Clock to Output) = 13 ns typ (CL = 50 pF)
⢠High Output Current: Fanout of 15 LSTTL Loads
⢠Wide Operating Voltage: VCC = 2 to 6 V
⢠Low Input Current: 1 µA max
⢠Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C)
Function Table
Outputs
Output Control Clock
Data
HD74HC564
HD74HD574
L
H
L
H
L
L
H
L
L
L
H
X
X
Q0
Q0
X
Z
Z
Q0 : level of Q before the indicated Steady-sate input conditions were established.
Q0 : complement of Q0 or level of Q before the indicated Steady-state input Conditions were established.
|
▷ |