HD74BC245A Datasheet, PDF (1/8 Pages) Hitachi Semiconductor – Octal Bus Transceivers With 3 State Outputs

HD74BC245A
Octal Bus Transceivers With 3 State Outputs
ADE-205-008A (Z)
Rev. 1
March 1993
Description
The HD74BC245A provides high drivability and operation equal to or better than high speed bipolar
standard logic IC by using Bi-CMOS process. The device features low power dissipation that is about 1/5
of high speed bipolar logic IC, when the frequency is 10 MHz. The device has ten buffers with three state
outputs in a 20 pin package. Each device has an active low enable input G and a direction control input
DiR. When DiR is high, data flows from the A inputs to the B outputs. When DiR is low, data flows from
the B inputs to the A outputs. When G is high, disables both A and B ports by placing then in a high
impedance.
Features
• Input/Output are at high impedance state when power supply is off.
• Built in input pull up circuit can make input pins be open, when not used.
• TTL level input
• Wide operating temperature range
Ta = –40 to + 85°C
Function Table
Control Inputs
G
DiR
L
L
L
H
H
X
H : High level
L : Low level
Z : High impedance
Operation
B data to A bus
A data to B bus
Z