|
HA17408P Datasheet, PDF (1/4 Pages) Hitachi Semiconductor – 8-Bit Multiplying Digital-to-Analog Converter | |||
|
HA17408P
8-Bit Multiplying Digital-to-Analog Converter
Description
The HA17408P is an 8-bit monolithic D/A converter that incorporates a reference current amplifier, an R-2R
resistor ladder, and eight high-speed current switches.
Circuit designers can set the maximum output current to match the needs of their applications by setting the
reference voltage and selecting a resistor value.
The reference current is distributed to the current value for each bit by the R-2R resistor ladder, and thus the
maximum output current is 255/256 times the reference current. For example, the largest output current that
can be acquired for a reference input current of 2.0 mA is 1.992 mA.
The HA17408P can be used in a wide range of applications including CRT displays, stepping motor control,
programmable power supplies, audio equipment, and attenuators.
Features
⢠A linearity of ±0.19% (± 1/2 LSB) is guaranteed.
⢠Short centering time (250 ns typical) for rapid conversions
⢠Low power dissipation: 157 mW typical
⢠Compatible with TTL and CMOS logic
⢠Standard supply voltages of VCC = +5.0 V, VEE = â5.0 V and = â15.0 V
⢠Wide output voltage range: +0.5 to â5.0 V
475
|
▷ |