English
Language : 

W.FL-R-SMT-1 Datasheet, PDF (6/6 Pages) Hirose Electric – Ultra Small Surface Mount Coaxial Connectors - 1.4mm Mated Height
sUsage Precautions
1. Plugs
(1) Mating/ un-mating
1) Mating.
1) Both parts must be aligned on the axis to mate correct. Press down firmly. A tactile “click” will confirm fully
mated condition.
2) Un-mating.
1) Fully insert the tool under the plug’s flanges as shown.
1) Apply even force upward until the plug is free.
W.FL-LP-N plug extraction tool
W.FL Cable
Assembly
Do not twist, apply excessive forces or sharp bends to the cable.
W.FL-R-SMT-1
(2) Cable handling
W.FL-LP-040
Cable Assembly
W.FL-R-SMT-1
Receptacle
Ê·
2N max
(3) Precautions
Do NOT forcefully twist or deform wires.
Ê·
2. Receptacles
(1) Recommended soldering
temperature profile
ʦçʧ
260
240
220
200
180
160
140
120
100
80
Peak temperature and time
240ç 3 seconds
183ç
Preheating (130ç to 165ç)
Within 2 minutes
40 to 50 seconds
Time
(2) Recommended screen thickness
1) The temperature profile indicates the board surface temperature at the point of contacts with the connector
terminals.
2) The temperature may vary, depending on the board size, the solder paste type and thickness.
0.1 to 0.12 mm
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
6