U-FL Datasheet, PDF (6/7 Pages) Hirose Electric – Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sConversion Adapters
qSMA Conversion Adapter
(Mating portion: U.FL side jack - SMA side plug)
(10.7)
8HEX
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
qSMA Conversion Adapter
(Mating portion: U.FL side plug - SMA side jack)
Part No.
HRMP-U.FLJ
CL No.
311-0300-2
14.05
6
(4.05)
5.6
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
qSMA Conversion Adapter
(Mating portion: U.FL side plug-SMA side jack)
1/4-36UNS-2A
Part No.
HRMJ-U.FLP
CL No.
311-0301-5
(18.6)
6
(4)
5.5
Note: This connector is used by compressing the mated
portion of U.FL side onto the U.FL-R-SMT portion.
sReceptacle Inspection
This receptacle is used for inspecting the continuity, withstand
voltage, and other aspects of the harness product.
1/4-36UNS-2A
Part No.
HRMJ-U.FLP-ST1
CL No.
311-0385-5
12.9
(7.9)
5
(4.4) 1
7HEX
This receptacle is used for check the continuity, withstanding
voltage, and other performance of the cable assembly products.
sPlug Extraction Tool
This jig is used for extraction from a mating condition.
M5∞0.5
Part No.
U.FL-R-1
50
U.FL
CL No.
331-0466-0
(90)
Note: Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088.
Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062.
6
Part No.
U.FL-LP-N-2
U.FL-LP(V)-N-2
CL No.
331-0494-5
331-0493-2