LF07-WBP-6S Datasheet, PDF (6/11 Pages) Hirose Electric – Miniature Waterproof Shielded Connectors

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoH_LS _Fpro_Sdu_ec_rt_is_eh_sa_●ve_Mbe_ie_nn_id_ais_tuco_rn_etin_Wued_a,_to_er_rw_pill_rb_oe_od_fis_Sco_hnt_ii_enu_le_dd_es_doon_C. P_ole_na_nse_ec_ch_te_ock_rt_she products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
■Termination and Assembly Instructions
The connectors are delivered with pre-assembed condition and the disassembly as shown No.1.
No.
1¹
Illustration
Solder termination fixture
Plug
Operation
Plug disassembly
1 Insert the plug into securely held solder
termination fixture as shown.
Locking collar
Insertion direction
Fixture Part No. Applicable connector
LF07BP-T01 LF07WBP-6S,6P,3S,3P
LF10BP-T01 LF10WBP-4S,4P,12S,12P
LF13BP-T01 LF13WBP-20S,20P,11S,11P
2
Body / insulator assembly
2 Loosen the backshell turning it counter
Backshell
clockwise and remove it from the body/
insulator assembly.
Solder termination fixture
Jack Disassembly
1
Jack
1 Insert the jack into the securely held solder
termination fixture as shown.
Insertion direction
Fixture Part No. Applicable connector
LF07BJ-T01 LF07WBJ-6S,6P,3S,3P
LF10BJ-T01 LF10WBJ-4S,4P,12S,12P
LF13BJ-T01 LF13WBJ-20S,20P,11S,11P
2
Body / insulator assembly
2 Loosen the backshell turning it
Backshell
counterclockwise.
21
Threaded section
6
Backshell
Threaded section
Tightening collar
Connector Assembly
1 Apply a coating of Loctite 7649
(Manufactured by Henckel Japan, Ltd,)
primer to the threaded sections of the
backshell and the tightening collar.
Completely dry the coated surfaces.
Note
(1) Drying time at room temperature is
approximately 30 to 70 seconds.
(2) Ensure sufficient ventilation of the area at
time of drying.
(3) Take necessary steps to protect the coated
surfaces from contamination.