MC-600R Datasheet, PDF (3/3 Pages) Hirose Electric – Double Balanced Mixers (Relay Headers)

sCircuit Diagrams
MC-601R
Numbers in parentheses ( ) indicate port numbers.
sPCB Mounting Pattern
(Parts mounting side) ^{Land (NOTE 1)}
Through hole
MC-602R
(Parts mounting side)
Land (NOTE 1)
Through hole
(Soldering side)
(Soldering side)
(NOTE 2)
(NOTE 2)
MC-601R
MC-602R
Note 1: One example is given for the form dimensions of the land.
Note 2: When glass epoxy board ( r~_ 4.7 ) of 0.8 mm thickness is used, the width (W) of the 50ø impedance micro stripline becomes W ≈1.4 mm.
sPrecautions
qThis product uses diodes and therefore care must be taken against static electricity when handling.
When using a soldering iron, please solder with a grounded soldering iron.
The soldering conditions are as described below.
Soldering temperature: 260ç or less
Soldering time: 10 seconds or less
qPlease use the supplied Teflon sheet to prevent solder flux creepage and so that the leads do not become
shorted due to solder flowing to the board mounting surface.
56