|
UX60S Datasheet, PDF (2/7 Pages) Hirose Electric – Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard | |||
|
◁ |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHUS pXr6od0uSctsShearveiebseeân Mdisicnoni-tBinueCd,oonr nwiell cbetodirssco,nStinMueTd smooon.uPlneatsreeccheecpk tthaecplerosdumctsesetattiunsgonrteheqHuiriorseemweebnsittse RooHfSUsSeaBrch2a.t0wSwwta.hnirodsae-rcdonnectors.com, or contact your Hirose sales representative.
â Specifications
Ratings
Voltage rating
Current rating
5 V AC
1A
Operating temperature range
Storage temperature range
-30 to +75ç
-40 to +85ç (Note 1)
Item
Specification
1.Contact resistance 50 mø max.
2.Insulation resistance 100 Mø min.
3.Withstanding voltage No flashover or insulation breakdown
4.Capacitance
2 pF max.
5.Total insertion/
withdrawal force
Insertion force : 35 N max.
Withdrawal force : 7 N min.
Conditions
100 mA
100 V DC
100 V AC / one minute
Measure between adjacent contacts at 1,000 ±10Hz
Measure with an applicable connector.
6.Durability
(mating/unmating)
With corresponding HRS connector.
Contact resistance: 70 mø max.
Withdrawal force: 3 N min.
5,000 cycles
7.Vibration
8.Random vibration
9.Shock
No electrical discontinuity of 1 μs or longer
No damage, cracks or parts dislocation.
Frequency 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in
each of the 3 axial directions
Frequency 50 to 2,000 Hz, 3 directions for 15 minutes each.
Acceleration of 490m/s2, 11 ms continuous time, sine half-wave,
3 cycles in each of the 6 directions
10.Heat Shock
Contact resistance: 70 mø max.
Temperature:-55ç / +20ç to 35ç / +85ç / +20ç to 35ç
Time: 30min.
/ 2 to 3 min. / 30 min. / 2 to 3 minutes
10 cycles
11.Temperature cycle Insulation resistance: 10 Mø min. (when dry)
7 cycles (168 hours) at -10 to 65ç , humidity of 90 to 98%
12.Salt spray
Contact resistance: 70 mø max.
48 hours, 5% solution of salt water
13.Solderablity
Wet state, solder coverage area 95% min.
Solder temperature 245ç, immersion time 2 to 3 seconds
Note 1: The term âstorageâ refers to connectors stored for a long period of time prior to mounting and use.
â Materials and Finish
Part
Insulator
Material
Synthetic resin
Contacts
Copper alloy
Shell
Copper alloy
Finish
Color: Black
Contact area: Gold plated
Lead area: Gold plated
Tin plated
Remarks
UL94V-0
---------------
---------------
2
|
▷ |