FX4C-20P-1.27DSA Datasheet, PDF (2/17 Pages) Hirose Electric – Stacking Height 5 to 11mm Half Pitch Connector

sProduct Specifications
Rating
Current rating 0.5A
Operating Temperature Range -55ç to +85ç (Note 1) Storage Temperature Range -10ç to +60ç (Note 2)
Voltage rating 125V AC Operating Humidity Range 40% to 80%
Storage Humidity Range 40% to 70%
Item
Specification
Condition
1. Insulation Resistance 100M ohms min.
Measured at 250V PC
2. Withstanding Voltage No flashover or insulation breakdown.
300V AC for 1 minute
3. Resistance
45m ohms max.
100mA
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 55m ohms max. Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle Contact resistance : 55m ohms max.
(-55ç: 30 minutes 15 to 35ç: 2 to 3 minutes
Insulation resistance : 100M ohms min.
(-85ç: 30 minutes 15 to 35ç: 2 to 3minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance : 55m ohms max.
300 cycles
8. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Part
Insulator
Receptacle Contact
Header Contact
Material
Polyamide
Phosphor bronze
Finish
Beige
Selective gold plated
Selective gold plated
Remarks
UL94V-0
________
________
Note : The black dots on the insulater will not affect performance.
sOrdering Information
qDip Type
FX 4C 1 - 80 P - 1.27 DSA L
q we
r
q Series Name : FX
w Series No. : 4C
e Product Height Variable:None: Standard 1: +1mm
2: +2mm
3: +3mm
r Number of Contacts: 20, 32, 40, 52, 60, 68, 80
t
y
u
i
t Connector Type P : Header
S : Receptacle
y Contact Pitch : 1.27mm
u Contact type DSA : Straight
i L: Board prefixed pin
qSMT Type
FX 4A H - 80 P - 1.27 SV
q we
rt
y
u
q Series Name : FX
w Series No. : 4A : With boss
4B : Without boss
e Product Height Variable
H : +0.5mm
e (Ratio to dip type standard product) 2 : +2mm
r Number of Contacts : 20, 32, 40, 52, 60, 68, 80
t Connector Type P : Header
S : Receptacle
1 : +1mm y Contact Pitch : 1.27mm
3 : +3mm u Contact type SV : Vertical type
A190