FX1-144S-1.27DS Datasheet, PDF (2/8 Pages) Hirose Electric – 1.27mm Pitch Connector

sProduct Specifications
Current rating
Voltage rating
Rating Signal Contact:
0.5A Signal Contact:
125V AC Operating Temperature Range-55 to 85ç (Note 1) Storage Temperature Range -10 to +60ç(Note 2)
Power Supply Contact: 1A Power Supply Contact: 250V AC Operating Humidity Range -40 to 80%
Operating Humidity Range -40 to 70% (Note 2)
Item
Specification
1. Insulation Resistance 1000M ohms min.
2. Withstanding Voltage No flashover or insulation breakdown.
3. Contact Resistance 60m ohms max. (conductor resistance included)
4. Vibration
No electrical discontinuity of 1µs or more
5. Humidity (Steady state)
Contact resistance: 70m ohms max.
Insulation resistance: 1000M ohms min.
6. Temperature Cycle
Contact resistance: 70m ohms max.
Insulation resistance: 1000M ohms min.
7. Durability (Mating/un-mating) Contact resistance: 70 m ohms max.
250V DC
Condition
1 minute
Signal contact
Power supply contact
300V AC
600V AC
100mA
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes¡15- to 35ç: 5 minutes max.¡
(-85ç: 30 minutes¡15- to 35ç: 5 minutes max.) 5 cycles
500 cycles
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
qFX1 Series
Parts
Insulator
Header
Receptacle
Straight header
Contact Right angle header
Receptacle
Prefixed pin
qFXV Series
Insulator
Parts
Header
Receptacle
Contact
Prefixed pin
Material
PPS
PPS/ PTB
Brass
Phosphor bronze
Phosphor bronze
Phosphor bronze
Material
LCP
PPS/ PTB
Phosphor bronze
Phosphor bronze
Finish
Black
Contact area:Gold plated
Lead area:Tin-lead plated
Tin-lead plated
Finish
Black
Contact area:Gold plated
Lead area:Tin-lead plated
Tin-lead plated
Remarks
UL94V-0
________
________
Remarks
UL94V-0
________
________
A135