DF3 Datasheet, PDF (2/14 Pages) GREATECS – Horizontal SMT Detector Switches with Side Stem

DF3 Series●2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
■Product Specifications
Rating
Current rating
Note 1
Voltage rating
Crimping
IDC
Crimping
Wire size
Wire size
250V AC
22 to 24 AWG : 3A _{Operating Temperature Range -55ç to +105ç (Note 2)}
26 AWG
: 2A
28 AWG
: 1A
26, 28AWG :1A
Operating Humidity Range 40% to 80% (Note 3)
Storage Temperature Range -10ç to +60ç (Note 4)
IDC
100V AC
Storage Humidity Range 40% to 70% (Note 4)
Rating
UL-CSA Safety Standard and Approved specification
24 AWG : 3A
Rated Current
Wire size
26 AWG : 2A (Note 5)
28 AWG : 1A
Rated Voltage
30V AC
■UL CSA Safety Standard File No.
UL
: E52653
CSA
: LR95109
Item
Specification
Condition
1. Insulation Resistance 1000Mø min.
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
650V AC, 1 minute
3. Contact Resistance 30mø max
100mA
4. Single Insertor/Extraction Force 0.3N(30gf)min, 4.4N(450gf)max.
Measure by the square steel pin with 0.5±0.002mm
5. Vibration
No electrical discontinuity of 1μs or more
Frequency : 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Humidity (Steady state) Contact resistance : 30mø max. Insulation resistance : 500Mø min. 96 hours at temperature of 40ç and humidity of 90% to 95%
7. Temperature Cycle Contact resistance : 30mø max. Insulation resistance :1000Mø min. (-55ç : 30 minutes 5 to 35ç: 10 minutes 85ç: 30 minutes 5 to 35ç: 10minutes) 5 cycles
8. Durability (Mating/un-mating) Contact resistance : 30mø max.
Tin plating : 30 cycles Gold plating: 50 cycles
9. Resistance to Soldering Heat No deformation of components affecting performance. ^{THT type Flow : 260ç for 10 seconds Manual soldering : 300ç for 2 seconds}
SMT type Reflow : At the recommended temperature profile Manual soldering : 300ç for 3 seconds
Note 1 : Current rating of header is 3A.
Note 2 : Includes temperature rise caused by current flow.
Apply to crimping contact type. Maximum operating temperature for IDC and receptacle type is 85ç.
Note 3 : Please use under conditions with no condensation occurred.
Note 4 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 5 : Apply to crimping contact type. The IDC type's rated current is 1A.
■Materials / Finish
Product
Crimping Socket
IDC Contact for Socket
ID Socket
Receptacle
Pin Header
SMT Pin Header
In-line Plug
In-line IDC Contact
In-line Adapter
Part
Insulator
Contact
Insulator
Contact
Insulator
Contact
Insulator
Contact
Insulator
Contact
Metal tab
Insulator
Contact
Insulator
Contact
Material
Polyamide
Phosphor bronze
Polyamide
Phosphor bronze
Polyamide
Phosphor bronze
Polyamide
Brass
Polyamide
Brass
Brass
Polyamide
Phosphor bronze
Polyamide
Brass
Finish
Black
Tin plated or gold plated
Black
Tin plated or gold plated
Black
Tin plated or gold plated
Black
Tin plated or gold plated
Beige
Tin plated or gold plated
Tin plated
Black
Tin plated or gold plated
Black
Tin plated
Remarks
UL94V-0
–––––––
UL94V-0
–––––––
UL94V-0
–––––––
UL94V-0
–––––––
UL94V-0
–––––––
–––––––
UL94V-0
–––––––
UL94V-0
–––––––
B208