FX18-60P-0.8SV Datasheet, PDF (12/12 Pages) Hirose Electric – 10+Gbps 0.8mm pitch Board to Board Connectors

FX18 Series●10⁺Gbps 0.8mm pitch Board to Board Connectors
■Cleaning recommendations
●Organic solvent cleaning
Solvent Type
Room temperature cleaning
IPA ( Isopropyl alcohol)
YES
HCFC ( Hydrochlorofluorocarbon )
YES
Heated cleaning
YES
YES
●Water based cleaning
When using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentation
issued by the various manufacturers of cleaning agents which describes it’s affects on metals, platings and plastics. Remove any
moisture after cleaning.
Residual flux or cleaning agents in the contact areas may affect electrical performance.
■Connector Precautions
●Allowable Clearance between the Mated Pair
Recommend the allowable clearance at mating including angled insertion to be Max.1mm.
Within 1mm
Within 1mm


Coplanar connection
Vertical connection Stacking connection
●PCB Fixture
PCB and chassis can not be stabilized only by the connector.
Fixture to stabilize the PCB is necessary.
When fitting using a rotary insertion plug, please ensure you refer to the Rotary Insertion Guideline (TADC 4-210630)
®
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: ^[phone] Fax: ^[phone]
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 04/2012. Contents are subject to change without notice for the purpose of improvements.
12