EX60T-C71P Datasheet, PDF (11/12 Pages) Hirose Electric – High-Speed Differential Signal Connectors

qAnchoring to the Case
Mounting of the receptacle connectors makes use of screws to fasten the connectors to the case as illustrated in the
diagram below. This contributes to a structure that is resistant to twisting.
Embedded nut
Case
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; _{;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;} ^{;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;}
EX60T-71P
M2 countersunk screw PCB
qA Design that Doesn't Use Heat-Shrink Tubing
The soldered wiring portion of the plug connector is secured to the molding which serves as a measure against the
short-circuiting of adjacent contacts. This eliminates the need to attach heat-shrink tubing.
The plug connector has been furnished with a retaining plate made of resin material for the purpose of preventing
short circuits with the metal portions of the cover case.
Molding
Contact
;;;;;;;;;;;;;;
Insulating retaining plate
;;;;;;;
qBatch Wiring of Plug Connectors
These connectors permit the batch soldered wiring of cables prepared with paste solder and partial reflow.
(Regularly soldered wiring is used for power supply contacts.)
Please contact our Technical Department about harness details for the purpose of satisfying harness qualities and
high-speed transmission characteristics.
11