ZX62 Datasheet, PDF (1/20 Pages) Hirose Electric – Micro-USB connectors meeting requirements of USB 2.0 Standard

NEW
Micro-USB connectors meeting requirements of USB 2.0 Standard
ZX Series
Note: Contact us to ascertain whether a TID number has
been acquired for an individual product.
sOverview
Extremely small high reliability connectors complying with physical,
electrical and environmental requirements of Micro-USB standard
(USB 2.0).
Receptacles and plugs are available in a wide variety of mounting
and termination configurations, permitting their use in various
applications.
sFeatures
1. Size reduction
Compared with the standard Mini-B connectors, the size of ZX
connectors is reduced by approximately 60% while still allowing a
high-speed data transfer of 480 Mbps, specified in USB 2.0.
2. Receptacle styles
Two interface configurations: Micro-B and Micro-AB in standard,
mid-mount and reverse mounting styles.
SMT and through-hole (shell) PC board terminations
3. Plug styles
Corresponding to the receptacle styles, two interface configurations:
Micro-B and Micro-A, with direct wire or PCB wire soldering.
Several plug styles can be used for data transmission, earphone or
charging applications.
4. High durability
Unique contact and lock configuration assures high durability while
maintaining easy insertion / disconnection. Fully mated condition
(when mated with corresponding HRS connector) is confirmed by a
definite tactile sensation
Drop-in
(Mid-mount)
Reverse
(Top mount)
Standard
(Bottom mount)
USB 2.0 Hi-Speed (480 Mbps)
Eye pattern measurement results:
Measured with USB 2.0 cable 2.4 m long
TP2
500ps/div
2010.8
1