QR-P15 Datasheet, PDF (1/7 Pages) Hirose Electric – Ultra-small Rack/Panel Crimp Connectors

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ultra-small Rack/Panel Crimp Connectors
QR/P15 Series
■Overview
Expansion of the proven QR/P Series with a separate panel-
mounted plugs / receptacles connecting with detachable crimp
terminated connectors.
Plugs / receptacles can be mounted on the panels and the
terminated connectors may be inserted at later time, allowing
wire crimp termination to be done away from the equipment.
Available in 8 or 24 positions (with 4 positions for power
contacts) and 40 positions.
■Features
1. Fully terminated connectors (crimp contacts) can be inserted /
removed from the panel mounted plugs/receptacles.
Polarization assures correct orientation, preventing incorrect
insertion of the connectors in the module.
2. Sequenced contact mating (40-position only)
The protection of the circuit is assured by having the 4 contact
at each end of the receptacle protrude forward by 0.8 mm, with
electrical wipe of 4.0 mm.
Remaining contacts electrical wipe is 3.2 mm.
3. Accepts power supply connections (24-position only)
The 24-position connectors incorporate power supply contacts.
The power supply connections use an MDF6 Series 4-position
connector (3.5 mm pitch, UL and CSA recognized, and can
handle 6A a current using AWG #16 conductors.
4. Reliable connections.
Two-point contacts assure highly reliable electrical and
mechanical connection.
●Separate connection to panel-mounted
connectors
Crimp terminated wires
Connector
Panel
Receptacle
Plug
Panel
1A 7
Connector
Crimp terminated wires
■Applications
PPC, data communications equipment,
automatic vending machines, measuring
instruments and other applications requiring
small rack-and-panel connectors.
2008.3
1