English
Language : 

P-AT-6 Datasheet, PDF (1/5 Pages) Hirose Electric – Programmable Attenuators
Programmable Attenuators
P-AT Series
sProduct Specifications
sFeatures
1. Used for frequencies from DC to 26.5GHz (max.)
Input/output couplings utilizes Hirose’s HE*
connector, which is combination of the internal
attenuation elements, provides the required
attenuation characteristic.
2. Self-disconnecting
The drive current will automatically switch off after
setting the attenuation.
3. Automatic return
In the event of sudden shock the attenuation will
quickly return to the pre-set level.
sApplications
Wide variety of measuring instruments and other
devices requiring control of high frequency
transmission lines.
* HE connector will mate with K type connectors
* K connector is a trademark of Anritsu Co.
Ratings Frequency range
DC~8GHz(P-AT-6,AP-AT-7) Operating temperate range -10ç to +75ç(No freezing)
DC~26.5GHz(P-AT-8) Operating relative humidity
95% Max.
Characteristic
1.Vibration
2.Shock
Requirements
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Conditions
Frequency of 10 to 55 Hz, overall amplitude of 1.5
mm for 2 hours in each of 3 directions
Acceleration of 98 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
sMaterials and Finishes
Component
Body
Coupling connector body
Female contact
Material
Aluminum
Stainless steel
Beryllium Copper
Finish
Conductive alumite
Passivated
Gold plating
sOrdering Information
P-AT - 6 ( 8 - 70 ) A
1
23 4
5
1 Series Name
2 Suffix
3 Maximum frequency (GHz)
4 Maximum attenuation (dB)
5 Revised
102